Palfinger PC 3800, Operating Manual

Page: 103 / 158

Chapter 9 Ending operation
Ending radio remote control operation
•
Push the stop button.
•
Charge the battery.
•
Secure the remote control console against unauthorized use.
After finishing all crane movements
•
Turn off the crane.
•
Secure the crane against unauthorized use.
•
Stop the vehicle motor.
•
Pull the ignition key.
•
Lock the driver's cab.
Before driving
Caution!
Incompletely retracted stabilizer cylinders create an acute
risk of fatality for the operator and others.
Starting to drive without securing the crane and supports properly is prohibited.
Every time before starting to drive check that:
•
the crane has not been tampered with by unauthorized persons;
•
the stabilizer outrigger beams and stabilizer cylinders are completely retracted and properly
secured;
•
the crane (hydraulic pump) is off;
•
the crane is secured for transport and side movement is not possible.
Caution!
Any winch components, load handling attachment, etc.
protruding over the vehicle width create an acute danger of accident
and danger of life.
•
Remove any winch components, load handling attachments, lifting gear, ancillary equipment,
etc. that protrude over the vehicle width in transport position
or are loose or unsecured
and store them before starting to drive.
•
The load is properly secured according to the local regulations and laws.
97