ILSL 33/44 Owner‘s Manual
Rev.1.1
25
7
Troubleshooting
ATTENTION:
Please check the following points before identifying any faults.
Serious injuries are possible from tools short circuiting main battery connections. Do not leave tools
or other equipment that may cause shorts around the battery.
•
Please change oil after working on hydraulic unit (removal of valves, opening of cylinder
etc.)
•
There is a possibility of injury if somebody other than an authorized technician works on the
liftgate.
•
Injuries are possible if short circuits are caused by tools, jewelry, or other conductive objects
on or near the battery connections.
7.1
Liftgate will not power on.
1. Check the shut off switch.
Turn ON the ON/OFF switch located in the control box.
On/Off Switch
Lift
Slide
In
Out
Up
Down
For questions regarding operation call (888) 774-5844
ILSL
• To operate this liftgate read and understand the
operating decals and manuals.
• Make certain the platform is clear before
operating the lift.
• Liftgate shut-off switch must be turned off when
liftgate is not in use.
• Keep platform in horizontal position when
loading and unloading.
• Do not overload, refer to capacity decals.
Loading Position:
• Lower platform
• Slide out liftgate
• Unfold platform
Storage Position:
• In down position fold up platform tip
• Slide in liftgate
• Raise platform
Max Capacity
on Platform
Platform
Load
24"
