ILSL 33/44 Owner‘s Manual
Rev.1.1
22
6.4
Decal Placement and Inspection
For operator’s safety, all decals appearing in “Decal Kit” must be in a conspicuous place on control
side of liftgate to be read by operator. This is typically a combination of decals on the liftgate and
truck body. Please make sure to place the maximum capacity decal on both sides of the door.
Decal Kit
Decal
Qty.
Part No.
Description
A
1
ATG-URGWA
Urgent Warning: Elevating gate instructions
B
1
85-1614-000
Operating Instructions (Control Box)
C
1
ATG-SWILFP-V
3-Button Remote Control Vertical Mount (if applicable, must
be located directly above control)
D
1
ATG-SWILFP-H
3-Button Remote Control Horizontal Mount (if applicable, must
be located directly above control)
E
2
ATG-XXXX
Capacity (please check the serial number plate to find out your
specific capacity)
F
1
ATG-CAB
Liftgate Shut-Off (located next to shut-off switch)
G
1
ATG-BKR
Max. Circuit Breaker Reset (must be located at the circuit
breaker)
H
2
ATG-WLH
Warning: liftgate can crush
I
2
ATG-CTN
Caution: Always stand clear of platform area
J
1
ATG-RESET
Circuit Breaker Protection
K
1
ATG-FT
Notice for Foot Control (if applicable)
L
1
ATG-UD
Toggle Decal (next to the toggle switch, if applicable)
M
1
ATG-WNG
Warning: Use handle to open (must be located underneath
handle (main section))
