64/172
cod. 00 477 2250 - 11/2013 - PN - Italy
USE AND MAINTENANCE
8 MAINTENANCE AND
CLEANING
8.1 SAFETY
PRECAUTIONS
Before performing any maintenance operations,
adopt the following precautions:
-
Make sure that all the parts of the stove have
cooled down.
-
Make sure that the ash is completely
extinguished.
-
Use the personal protective equipment
]|&&!
-
Make sure that the main power switch is off.
-
Make sure that the power supply cannot be
reconnected accidentally. Unplug the cord from
the socket on the wall.
-
Always use suitable tools for maintenance.
-
Once maintenance or repairs have been
completed, before operating the stove again,
restore all protection features and reactivate
all safety devices.
-
A suitable ash vacuum cleaner (canister)
makes it simpler to clean the ash.
8.2 STOVE CLEANING FUNCTION
8.2.1 Door opening (where available)
To open the door, use lever
1
as shown in Fig. 8.2.1.
8.2.2 % &
The stove requires a simple but frequent and
thorough clean to guarantee it will work properly
!
Clean only when the stove is cold.
To guarantee adequate cleaning, use the
“
CLEANING STOVE
” function, see paragraph 7.9.
This function cleans the stove while preventing ash
from spreading in the room.
w
maximum speed, thus preventing ash from leaving
!
It can only be activated when the stove has cooled
down completely.
Press the
OFF
button for 2 seconds.
'w!
At the end it will switch off automatically.
To stop the operation manually, press the
OFF
button.
DAILY CLEANING.
X !}!
8.2.2-2)
By throwing away the ashes every day the air for
w
the HEARTH.
@
-
any of the ash dirtying the room;
-
damaging the vacuum cleaner.
Fig. 8.2.1
Fig. 8.2.2-2
Fig. 8.2.2-1