54/172
cod. 00 477 2250 - 11/2013 - PN - Italy
USE AND MAINTENANCE
-
MENU TYPE SHORT:
w
temperature values shown on the display
indicates that the set room temperature and/
or water has been reached and the stove will
modulate its power to the minimum level;
- MENU
TYPE
ROLLING:
when the set room
temperature and/or water has been reached, in
addition to the work parameters the message
THERMOSTAT ON
will appear.
SET WATER T.
(value setting range from
55°
to
85°
C).
IIndicates the temperature set by the thermostat
(Fig. 7.4-2). When the temperature is the same as
|
when “
SET WATER. T.
” appears, press the key
to increase the value and
to reduce it.
SET ROOM T.
(value that can be set between
L
(low), 10-40°C, H (hot)
.
It indicates the temperature set on the thermostat
(Fig. 7.4-3). When room temperature is the same
|
message “
SET ROOM T.
” appars, press the
key to increase the value or the
to reduce it.
)
The values set will be maintained up to the next
variation, even if the stove is off or disconnected
from the electricity supply.
MODULING
Once the temperature set has been reached, the
stove moves into modulation and will indicate
“
MODULING WORK
” and “
THERMOSTAT ON
”.
During this phase the power will reduce in order
to maintain the room temperature with the least
possible consumption of energy.
Setting
the room
thermostat
Room thermostat
excluded - Stove
power as set
Room thermostat
always active -
Stove power 1
Fig. 7.4-2
LOW 10°-11°- -39°-40° HOT
Fig. 7.4-3
Fig. 7.4-4
