manualshive.com logo in svg

Palas 6798, Operating Manual, Page: 5 / 110

Share
Download
Palas 6798 Operating Manual Download Page 5

1  

About this manual

6924-en_V1.3_09/20

5

1

About this manual

1.1

Function of the manual

This manual provides information on the 

PMFT 1000

 test rig system for res-

piratory masks.

It includes information on:

• Safety
• Functionality
• Use
• Operation
• Maintenance

1.2

Target group for the manual

This manual is intended for 

specialized users

 who are familiar with activi-

ties in the field of particle measuring technology based on their technical ed-
ucation or experience.

1.3

Validity of the manual

This manual is valid for the following models of test rigs:

•

PMFT 1000

•

PMFT 1000 M

1.4

Related documents

The operating instructions for the following devices are essential compo-
nents of the system:

• Aerosol generator for liquids 

PLG 1000

• Aerosol spectrometer 

Promo 1000 

(for 

PMFT 1000

) or

 Promo LED 2300

(for 

PMFT 1000 M

)

• Dilution system 

VKL 100

1.5

Storage of documents

The storage of documents is the responsibility of the owner and/or user to
ensure the documents are available when they are needed. Store the docu-
ments together with the device.

Summary of Contents for 6798















































































































Reviews:

No comments