background image

6

OM90A

SAFETY STATEMENTS

  

DANGER 

GENERAL SAFETY PRECAUTIONS

WARNING!  READ MANUAL PRIOR TO INSTALLATION

Improper installation, operation, or maintenance of this equipment could result in se-

rious injury or death. Operators and maintenance personnel should read this manual, 

as well as all manuals related to this equipment and the prime mover thoroughly 

before beginning installation, operation, or maintenance. 

FOLLOW ALL SAFETY 

INSTRUCTIONS IN THIS MANUAL AND THE PRIME MOVER’S MANUAL(S).

READ AND UNDERSTAND ALL SAFETY STATEMENTS

Read all safety decals and safety statements in all manuals prior to operating or 

working on this equipment. Know and obey all OSHA regulations, local laws, and 

other professional guidelines for your operation. Know and follow good work prac-

tices when assembling, maintaining, repairing, mounting, removing, or operating this 

equipment.

KNOW YOUR EQUIPMENT

Know your equipment’s capabilities, dimensions, and operations before operating. 

Visually inspect your equipment before you start, and never operate equipment that 

is not in proper working order with all safety devices intact. Check all hardware to 

ensure it is tight. Make certain that all locking pins, latches, and connection devices 

are properly installed and secured. Remove and replace any damaged, fatigued, or 

excessively worn parts. Make certain all safety decals are in place and are legible. 

Keep decals clean, and replace them if they become worn or hard to read.

WARNING

 

CAUTION

   NOTICE

THIS SYMBOL BY ITSELF OR WITH A WARNING WORD THROUGHOUT THIS MAN-

UAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR 

PERSONAL SAFETY OR THE SAFETY OF OTHERS. FAILURE TO FOLLOW THESE 

INSTRUCTIONS CAN RESULT IN INJURY OR DEATH.

THIS SIGNAL WORD INDICATES A HAZARDOUS SITUATION WHICH, IF 

NOT AVOIDED, WILL RESULT IN DEATH OR SERIOUS INJURY.

THIS SIGNAL WORD INDICATES A HAZARDOUS SITUATION WHICH, IF 

NOT AVOIDED, COULD RESULT IN DEATH OR SERIOUS INJURY.

 THIS SIGNAL WORD INDICATES A HAZARDOUS SITUATION WHICH, IF 

NOT AVOIDED, COULD RESULT IN MINOR OR MODERATE INJURY.

NOTICE IS USED TO ADDRESS PRACTICES NOT RELATED TO PHYSICAL 

INJURY.

Summary of Contents for JRB SMART-LOC
































Reviews: