12
OM90A
REMOVE THE ATTACHMENT FROM THE COUPLER AT THE
END OF EACH SHIFT
.
Failure to do so could cause increasing tightness of the locking mechanism, causing it
to become difficult to uncouple.
MAINTAINING THE ATTACHMENT
•
Before performing maintenance (unless otherwise specified), lower the attach
-
ment to the ground, apply the brakes, turn off the engine and remove the key.
• Never perform any work on the attachment unless you are authorized and
qualified to do so. Always read the operator service manuals before any repair
is made. After completing maintenance or repair, check for correct functioning
of the attachment. If not functioning properly, always tag “DO NOT OPERATE”
until all problems are corrected.
• Worn, damaged, or illegible safety decals must be replaced. New safety de-
cals can be ordered from your local dealer or the manufacturer.
• Never make hydraulic repairs while the system is under pressure. Serious
personal injury or death could result.
• Never work under a raised attachment.
EQUIPMENT SAFETY PRECAUTIONS
Summary of Contents for JRB SMART-LOC
Page 2: ......
Page 4: ...4 OM90A THIS PAGE IS INTENTIONALLY BLANK...
