13
OM90A
ITEM# A67355
WARNING! HIGH PRESSURE FLUID
ITEM# A67356
WARNING! MISUSE HAZARD
APPROX. 4” X 2.75”
HIGH PRESSURE FLUID
HAZARD
Relieve pressure before
disconnecting lines.
DO NOT use hands to check
for leaks.
Consult physician immediately
if skin penetration occurs.
A66701
APPROX. 4” X 2.75”
Read and understand the
operator’s manual before
operating.
Coupler may drop attachment
if not operated properly.
Contact your nearest dealer for
replacement manual and safety
labels.
A66702
MISUSE HAZARD
A67355
A67356
Serial Tag
DECALS
DECAL PLACEMENT
GENERAL INFORMATION
The following diagram(s) show the location of the decals used on your attachment. The decals are
identified by their part numbers, with reductions of the actual decals shown on the following pages. Use
this information to order replacements for lost or damaged decals. Be sure to read all the decals before
operating coupler. They contain information you need to know for both safety and product longevity.
IMPORTANT:
Keep all safety decals clean and legible. Replace all missing, illegible or damaged safety
decals. When replacing parts with safety decals attached, the safety decals must also be replaced.
REPLACING SAFETY DECALS:
Clean the area of application with nonflammable solvent, then wash
the same area with soap and water. Allow surface to fully dry. Remove the backing from the safety de-
cal, exposing the adhesive surface. Apply the safety decal to the positon shown in the diagram above
and smooth out any bubbles.
Summary of Contents for JRB SMART-LOC
Page 2: ......
Page 4: ...4 OM90A THIS PAGE IS INTENTIONALLY BLANK...
