18
e
Do not use the system around strong electric fields, electromagnetic
fields (e.g. MRI scan room) and mobile wireless communication
devices. Using the device in an improper environment may cause
malfunction or damage.
e
The compliance with EMC and EMI regulation cannot be guaranteed by
the use of modified cables or those which do not comply with the same
standards under which the equipment was validated.
e
The system must not be used adjacent to or supported by other
equipment.
e
The recommendations of this manual must be followed.
e
Do not use accessories, transducers, internal parts of components
and other cables other than those previously specified by the
manufacturer. This may result in increased emission or decreased
electromagnetic immunity and result in improper operation.
e
Portable RF communications equipment (including peripherals
such as antenna cables and external antennas) should by used no
closer than 30cm to any part of the ultrasound system, including
cables specified by the manufacturer. Otherwise, degradation of the
performance of this equipment could result.
e
To maintain basic safety in relation to electromagnetic disturbances
during the expected service life, always use the system in the
specified electromagnetic environment and follow the maintenance
recommendation described in this manual.
The following tables provide information on compliance of the equipment
according to the standard EN 60601-1- 2:2015.