PACOM PDR-16LX, User Manual

Page: 100 / 130

User’s Manual
88
Move the cursor over the date and time and press the button. You can use the
Left
and
Right
arrow buttons to highlight the year, month, day, hours, minutes and seconds. Use the
Up
and
Down arrow buttons to change to the date and time you want to search for video. Once you
have set the date and time you want, press the button. Then highlight Go and press the
button.
The selected date and time will display. (If no video was recorded during the selected time, a
message appears alerting you that no image was recorded at that time.) The
PLAY/PAUSE
,
RW
,
FF
, Jog and Shuttle can now be used to review the surrounding video.
Calendar Search
Figure 110 — Calendar Search screen.
Days with recorded video display on the calendar with white numbers. You can highlight the
days with recorded video by using the arrow buttons. Once you have highlighted a day, press
the button to select it.
A time bar displays at the bottom of the calendar. Hours in which video was recorded will be
highlighted with blue. You can use the
Up and Down arrow buttons to highlight the time bar.
Once the time bar is highlighted, you can select the time by using the
Left
and
Right
arrow
buttons.
NOTE: The time bar is in one-hour segments. If a segment is highlighted, it means that
some video was recorded during that hour. However, it does NOT mean video was
recorded for the entire hour.
If the DVR’s time and date have been reset to a time that is earlier than some recorded video, it
is possible for the DVR to have more than one video stream in the same time range. Move to
Select a Segment , and select the video stream you want to search. Refer to the Appendix D –
Time Overlap for further information on searching time-overlapped video streams.