Packard Bell ENTJ75, Service Manual

Page: 112 / 164

CHAPTER 3: Replacing notebook components
106
5
Note the orientation of the power button board for later reference and then
remove the board from the LCD assembly lid.
6
Disconnect the power button cable from the board.
7
Connect the power button cable to the new power button board.
8
Position the new power button board on the LCD assembly lid making sure
it is in the same orientation noted on step 5 .
The board should fit snugly against the spring to ensure proper contact when
pressing the power button.
9
Place the LCD back on the LCD assembly lid.
10
Return the hinge screws to their places.
11
Reinstall the LCD front panel by performing steps 8 – 11 of the “Replacing
the LCD front panel” procedure on page 95 .
12
Reinstall the LCD panel assembly by performing steps 16 – 23 of the
“Replacing the LCD panel assembly” procedure on page 64 .
13
Turn the notebook over so the palm rest is facing up.
14
Reinstall the keyboard and the keyboard cover by performing steps 5 – 8 of
the “Replacing the keyboard” procedure on page 62 .
15
Reinstall the battery.