Packard Bell ENTJ75, Service Manual

Page: 79 / 164

www.packardbell.com
73
5
Remove the speaker screws.
6
Release the speaker cable from the palm rest, and then remove the
speakers.
7
Position the new speakers on the palm rest.
8
Secure the speakers with the screws removed in step 5 and cover it with
the tape that was detached in step 4 .
9
Secure the speaker cable on the palm rest latches
10
Reinstall the palm rest by performing steps 19 – 21 of the “Replacing the palm
rest” procedure on page 68 .
11
Reinstall the LCD panel assembly by performing steps 16 – 23 of the
“Replacing the LCD panel assembly” procedure on page 64 .
12
Reinstall the keyboard and the keyboard cover by performing steps 5 – 8 of
the “Replacing the keyboard” procedure on page 62 .
13
Return the optical screw drive in its place.
14
Reinstall the hard drive by performing steps 8 and 9 of the “Replacing the
hard drive” procedure on page 54 .
15
If you have disconnected any wireless antennas, reconnect them now.
16
Reinstall the bay cover.