Packard Bell ENTJ75, Service Manual

Page: 106 / 164

CHAPTER 3: Replacing notebook components
100
Replacing the LCD
Tools you need to complete this task:
Screws removed during this task:
•
1 black M2×5 (hard drive)
•
1 black M2.5×6 (optical drive)
•
3 black M2.5×6 (keyboard cover)
•
2 black M2.5×6 (LCD panel hinges - bottom)
•
2 black M2.5×6+Nylok (LCD panel hinges - top)
•
4 black M2.5×6+Nylok (LCD front panel)
•
2 chrome M2×4 (LCD hinge covers)
•
4 black M2.5×6+Nylok (LCD front panel)
•
4 black M2.5×5 (LCD panel hinges)
•
4 chrome M2×3 (LCD panel brackets)
To replace the LCD:
1
Complete the steps in “Preparing the notebook” on page 47 .
2
Remove the LCD panel assembly by performing steps 2 – 15 of the
“Replacing the LCD panel assembly” procedure on page 64 .
3
Remove the LCD front panel by performing steps 3 – 7 of the “Replacing the
LCD front panel” procedure on page 95 .
4
Release the LCD, webcam, microphone, antenna, and power button from
their LCD assembly lid latches.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe