Receiver
NOTICE
1. Insert batteries four double “AA” batteries into the receiver module.
2. The receiver has to learn the handset code: Remove the front surround (Figure 47 on page 28) followed
by the backing plate (Figure 48 on page 28). Locate the caddy on the left-hand side of the fireplace.
The reset button is located here.
3. Press and hold the receiver’s reset button (Figure 43) until you hear two (2) beeps. After the second, longer
beep, release the reset button. Within the subsequent 20 seconds press the “DOWN ARROW” button on
the handset until you hear two (2) short beeps confirming the code is set.
NOTE: This is a one time setting only, and it is not required when changing the batteries in the handset or
receiver.
4. When the RF receiver is placed in the appliance, the surrounding metal can reduce reception considerably.
Figure 43: Maxitrol reset button location.
i20 TOFINO
25
5055.980-A
150317
-32
