Software Version
Press and buttons simultaneously. Software version is displayed.
Handset Model Number
Press and buttons simultaneously. Handset model number is displayed.
Deactivated Functions
1. Install batteries. All icons are displayed and flashing.
2. While the icons are flashing, press the relevant function button and hold for 10 seconds.
3. The function icon will flash until deactivation is complete. Deactivation is complete when function icon and two hori-
zontal bars are displayed.
NOTE:
If a deactivated button is pressed, there is no function, and two horizontal bars are displayed.
NOTE:
Deactivation remains in effect after change of batteries.
Activate Functions
1. Install batteries. All icons are displayed and flashing.
2. To activate a function, press the relevant button and hold for 10 seconds.
3. The function icon will continue to flash until activation is complete. Activation is complete when the
function icon is displayed.
The following Functions can be Deactivated / Activated:
•
CHILD PROOF
•
PROGRAM MODE
•
THERMOSTATIC MODE (also deactivates PROGRAM MODE)
•
ECO MODE
Setting the Electronic Code
(First time use only)
Radio Frequency Handset
A code is selected automatically for all Mertik Maxitrol electronics from among 65000 codes available. The
receiver must be paired with the handset. (see instructions on page 25).
WARNING
•
Battery replacement is recommended at the beginning of each heating season.
•
Old or dead batteries should be removed immediately. If left in the unit the batteries can overheat,
leak, and / or explode.
•
Do NOT expose batteries (including during storage) to direct sunlight, excessive heat, fire, mois-
ture, or severe impact. Each of these conditions can cause the batteries to overheat, leak, and/or
explode.
•
New and old batteries and different brands of batteries should not be used together. Mixing of
various batteries can cause the batteries to overheat, leak, and/or explode.
i20 TOFINO
14
150317-32
5055.980-A
