IFC Module
The Proflame 2 Integrated Fireplace Control (IFC) module (Figure 3) is a device that allows automatic ignition
and pilot flame supervision, and commands the functions of the hearth Heater. It’s configured to control the
ON/OFF main burner operation, giving the choice of both IPI (intermittent pilot ignition), and CPI (continuous
pilot ignition) modes. The Proflame 2 IFC module controls and connects directly to the pilot assembly and the
automatic valve using low electric power.
The IFC module can be powered by both an AC power supply, and battery pack for back up. The Proflame
2 offers the added ability to control the comfort fan speed from OFF through six (6) speeds, a remotely
actuated auxiliary outlet and a dimmable light outlet. The external batteries can provide DC power to the IFC
allowing the batteries to be used only when line power is interrupted or lost, and if the Heater does not use a
combustion fan.
Operating Procedure
Initializing the system for the first time.
1. Install 4 AA batteries into the battery holder located behind the electronic control module on the pull - out
caddy.
2. Install 3 AAA batteries into the Proflame 2 Remote Transmitter (Figure 1).
3. Plug the power cord into the Tofino and open the gas supply line.
4. With the front surround (Figure 47 on page 28) and backing plate (Figure 48 on page 28) removed,
press the button marked “PRG” on the caddy (Figure 3) once. The module will beep 3 times indicating
that it is ready to synchronize with a remote transmitter.
5. On the remote transmitter, push the power on button once. The remote transmitter will beep 4 times to
indicate that the remote transmitter and the control module are now synchronized. The remote transmitter
is now ready to use.
i20 TOFINO
7
5055.980-A
150317
-32
