manualshive.com logo in svg

Pacific Communications IDR 016 Series, Training Course Notes, Page: 65 / 97

Share
Download
Pacific Communications IDR 016 Series Training Course Notes Download Page 65

All rights reserved Pacific Communications 2001 

65 

C

HAPTER 

6: S

ETTING 

U

P A 

B

ASE 

U

NIT

:

 

 

 

Hardware Requirements 
 
Celeron Processor 
64mb RAM 
Video Card with 16mb Ram capable of doing 1024x768, minimum of 24 bit True Colour 
Hard Drive 
Floppy Drive 
CDRW Drive/DVD Drive 
 
Network Card for Lan 
Modem for Dial Up Connections 
 
NOTE: The Time Zones on both the Post Unit and Base Unit MUST BE THE SAME. Video resolution 
must be set at 1024x768 in 24 bit True Colour. 
 
 
With the post software, there are four diskettes. Disk 1, Disk 2, OEM Disk & Drivers. The OEM disk 
contains all the bitmap images. The driver diskette is only used when installing the IDR Card. 
 
The Base s oftware has three diskettes only. Disk 1, Disk 2, OEM Disk.  
 
Note: If you do not install the OEM disk, the unit will not work properly. This can be overcome by copying 
the bitmaps from the OEM Disk to the IDRx016 directory. 
 
Insert Disk 1 into FDD of the Base Set 
 
Go to Start, Run 
 

 

 

 

Summary of Contents for IDR 016 Series


































































































Reviews:

No comments