manualshive.com logo in svg

Pacific Communications IDR 016 Series, Training Course Notes, Page: 15 / 97

Share
Download
Pacific Communications IDR 016 Series Training Course Notes Download Page 15

All rights reserved Pacific Communications 2001 

15 

 

Configuration Menu 

 

 

 

• 

Startup: When you turn on the system, SmartShell will be accessed automatically. Then 
SmartShell will open the necessary software for running the IDR, including SmartGuard and 
SmartSearch.. 

 

Execute Menu 

This menu allows you to access all IDR programs. 
 

 

 
 

• 

Restart All: Restarts the programs. 

• 

SmartSetup: Refer to the IBank Setup section in Chapter ??? 

• 

SmartScan: This is invisible software. It scans the hard driver for recording. 

• 

SmartGuard: Refer to SmartGuard section in this chapter. 

• 

SmartSearch: Refer to SmartSearch section in this chapter. 

• 

SmartBackup: This is used to back up data. Refer to SmartBackup section. 

• 

SmartServer: This is invisible software that prepares images to send to remote sites via modem or 
LAN. SmartServer needs to be activated. This is activated by default. 

• 

SmartPager: Not a/v in Australia 

• 

Explorer: Accesses Windows. 

 
 
 
 
 
 
 
 
 
 

Summary of Contents for IDR 016 Series


































































































Reviews:

No comments