manualshive.com logo in svg

Pacific Communications IDR 016 Series, Training Course Notes, Page: 6 / 97

Share
Download
Pacific Communications IDR 016 Series Training Course Notes Download Page 6

All rights reserved Pacific Communications 2001 

6 

B

EFORE 

S

TARTING

 

 

The IDR series consists of three models: IDR 1508, IDR 2016 and IDR 3016. Some buttons or 
functions are disabled in the IDR1508 and the IDR2016 models. Check the model number before 
calling the dealer or the installer. 
 

I

NDEMNITY 

C

LAUSE

 

 

Pacific Communications makes no guarantee that the software supplied is compatible with or error free 
when used in conjunction with other operating software or hardware. 
 
 Installation of any Pacific Communications supplied software is done at the installers own risk 
 
No title or intellectual property right is transferred with the sale of software from Pacific Communications 
and no right is given to copy,  replicate or reverse engineer in any way the software supplied. 
 
Pacific Communications accepts no liability for any loss, damage, cost or expense incurred arising directly 
or indirectly or for any consequential loss however arising from the operation of any Pacific 
Communications supplied software. 
 
If assistance is required when installing software Pacific Communications reserves the right to charge for 
such services provided. 
 

Summary of Contents for IDR 016 Series


































































































Reviews:

No comments