Pacific Communications IDR 016 Series Training Course Notes Download Page 59

Page: 59 / 97

Restoring Data to the Hard Drive

1. Select the backup icon in Smart Search.

2. A dialogue appears. Click on

Restore New

if you want to restore new data in a target backup drive.

If you select Restore New in Backup dialog box, the following Backup Restore dialog box
appears. There are two ways to select the bank for restoring in the list of Backup Restore dialog
box.

Not

e: Restore is not required in case of backing up to HDD or DVD-RAM.

Not

e: We strongly recommend that you stop auto backup during reviewing the backup data. If

you review the image during auto back up, it might reduce the speed.

1. Selecting the bank directly

- Check the backup period and type information in the list.
- Select a bank to restore using a mouse.

Not

e: Use a Shift key when selecting multiple banks..

2. Selecting the bank after specifying restore range

Summary of Contents for IDR 016 Series





























































































Search results

Summary of Contents for IDR 016 Series

Reviews:

Pacific Communications IDR 016 Series, Training Course Notes, Page: 59 / 97

Search results

Summary of Contents for IDR 016 Series

Reviews: