All rights reserved Pacific Communications 2001
17
S
ETUP
Setting up the system
When in the main GUI, click on the SETUP button.
The setup menu will appear.
•
Camera On/Off: Enables or disables cameras.
•
Location: Title of the location where the system is installed.
•
Spot sequence dwell: Sets the sequencing interval of SPOT Monitor. The IDR provides one Spot
output for a regular television or NTSC or PAL mo nitor.
•
Sequence dwell: Sets the sequencing dwell time. The camera can be sequenced to watch all
cameras on one monitor.
•
Event monitoring dwell: Sets the dwell time of one-screen mode when a related sensor is
activated. If set to 0, the IDR will not sequence through multiple events on the spot monitor. Any
other setting will sequence as per the dwell time.
•
Detect field: Detects field signal and shows only the odd field. If the box is not checked, the
images will be a little shaky.
•
Show OSD: Displays textual information on the image. The box should always be ticked as it
shows information like Recording, modes and motion detection.
Remote Control can be used for High
Level Interface. Be sure to set up correct
baud rates.