MAKING USER SETTINGS (cont.)
This diagram shows an example only. Please make
sure that, for
each
resolution, you select the correct
setting (yes or no) that applies to the TV.
The on-screen
menu shows the
selected setting.
TV Display Capability
1080i : YES
720p
: NO
480p
: YES
480i
: YES
TV Display Capability
1080i : NO
720p
: NO
480p
: YES
480i
: YES
Further information about the TV Display Capability
The TV Display Capability settings relate to equipment that is connected to the HDMI and
COMPONENT VIDEO OUT connectors because the settings control the output at those
connectors. If equipment is connected via a HDMI cable, that equipment may also pass information
back to the set-top, which may affect what settings are available.
Generally, the TV Display Capability settings do not affect equipment connected to the VIDEO OUT
and S-VIDEO jacks, because the output at these jacks will always be the standard definition 480i.
4. When you are satisfied that all the TV resolutions are correct, press the
L
button. The front
panel displays “reS” again. To continue making the settings, see page 47.
