22
SOLVING PROBLEMS (cont.)
Check
Suggested solution
Further checks, if there is still a problem
Can you display menus
and guides on the screen?
If your TV is connected to the VIDEO
OUT or S-VIDEO OUT jacks, then you
will see menus and guides only if the
screen resolution is set to
480i
.
Check the resolution setting (see page 16) and
change it if necessary.
Is there any sound?
Check that the audio cables are securely
and correctly connected.
Check that you have not muted the sound on your
home terminal and/or TV. Adjust the volume
control on your home terminal and/or TV.
If you can hear only mono sound, first check that
the program is likely to have stereo sound (an old
movie, for example, may not be in stereo).
Can you see and hear a
DVD that you are
trying to play?
For the signal to loop through your
home terminal from a DVD (or similar
equipment) to reach your TV, you must
activate baseband loopthrough by turning
off your home terminal.
Check that all the audio and video cables are
securely and correctly connected, including any to a
home theater receiver that you may be using to
enhance the sound.
Can you see only
regular (analog)
channels but not any
digital channels?
The bypass feature may be turned on.
Press the
BYPASS
button on your
remote control to turn the feature OFF
(make sure the word
BYPASS
is not
lighted on the front panel).
YES
NO
YES
NO
YES
NO
YES
