13
OPERATING YOUR HOME TERMINAL
Turning your home terminal on and off
After you have connected your home terminal to the AC wall outlet (and switched this outlet ON,
if it has a switch), wait until you can see the time on its front-panel display.
Press the button labeled
POWER
on the front panel of your home terminal to turn it on.The light
around the
POWER
button goes from red to green, to show that your home terminal is ON.
To turn your home terminal on or off at any time, press the
POWER
button on its front panel or
the
CBL
button on your remote control.
NOTE
It is important to wait for the time to appear on the front-panel display before you turn on your home
terminal. When the time appears, your home terminal has received all its data from the cable, including
any updates that are available.
NOTES
It is important that, unless there is a lightning storm or you will be away from your home for a long time,
you do not unplug your home terminal at the wall AC outlet (or do not switch it off there, if the outlet
has a switch). Your home terminal can not be updated with new features, through the cable, if it is
disconnected from the AC power supply.
You can use the General Settings screen to set the POWER OUTLET (AC Outlet) on your home terminal to
be “Always on” or “On with cable box (Settop)”. With this second setting, a TV attached to POWER OUTLET
will turn off when you turn off your home terminal and will turn on when you turn on your home terminal.
gui
display
BYPASS
HDTV
Wait for the time to appear
on the front-panel display.
power
ENERGY STAR
To turn on your
home terminal,
press the power
button.
The light around
the button changes
from red to green.
