9
REAR PANEL (cont.)
POWER OUTLET
Connect the TV’s power cord here to provide AC power to your TV.
POWER INPUT
Connect your home terminal’s power cord here.
CABLE IN
Connect the cable service here. The optional bypass module also connects here.
BYPASS
Connect an optional bypass module here, to receive power from home terminal.
AUDIO IN
Connect to the stereo audio outputs on your DVD player (or similar).
AUDIO OUT TV and
AUDIO OUT VCR
Connect to the stereo audio inputs on your stereo TV, stereo VCR or
optional stereo amplifier (the output is the same from both pairs of jacks).
DIGITAL VISUAL
INTERFACE (DVI)
If your HDTV has a DVI, connect it here for a
digital
video connection
instead of using the 3
analog
COMPONENT VIDEO connectors.
DIGITAL AUDIO OUT
Connect to the
electrical
digital audio input on optional digital audio
equipment, such as an audio decoder or home theater receiver.
DIGITAL AUDIO IN
Connect to any digital audio output that loops through your home terminal.
VIDEO IN
Connect to the video baseband output on your DVD player (or similar).
VIDEO OUT
Connect to the video baseband input on, typically, your VCR.
OPTICAL AUDIO OUT
Connect to the optical digital audio input on optional digital audio equipment.
OPTICAL AUDIO IN
Connect to any digital audio output that loops through your home terminal.
S-VIDEO OUT
Connect to the S-video baseband input (if present) on, typically, your VCR.
COMPONENT VIDEO OUT
If your HDTV does
not
have a DVI (see above), connect your HDTV here.
COMPONENT VIDEO IN
Connect equipment such as a DVD player, if it has component video jacks.
IR TRANSMIT
Connect to an optional VCR controller.
IR RECEIVE
Connect to an optional “remote eye” IR receiver.
WARNINGS
Do not connect your home terminal
(or any other equipment such as a
TV or VCR) to the AC power supply
until you have properly connected
all the other cables.
Disconnect your home terminal
from the AC power supply before
you disconnect any other
equipment from its rear panel.
The power outlet is designed only for
connection to the AC power cord for
a TV. The maximum power it can
supply is 500 watts. Do not connect
any equipment that uses more than
500 watts, or any non-TV equipment
such as a toaster or hair drier.
The cable input is designed for
connection to a cable network only.
You must not connect any other
equipment, such as a VCR, to this
input.
Any cable connected to DIGITAL
AUDIO jacks must be 75 ohm
coaxial, not regular audio cable.
