Pace Technologies NANO 1000S Manual Download Page 9

Page: 9 / 76

NANO 1000S Polisher

NSTRUCTION

ANUAL

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲

3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] W eb: https://www.metallographic.com

Please read this instruction manual carefully and follow all installation, operating and safety guidelines.

1.4 Features Continued



The easy to view screen post features height, pivot, and rotational

adjustments for maximum viewing angles



Includes a low-profile splash ring to prevent excess water from escaping the

bowl.



Protective lid reduces the chance of contamination while storing.

2.0 Shipping, Unpacking and Installation

2.1 Shipping



The NANO 1000S is shipped in a specially designed custom box. When

unpacking check that all parts are included and undamaged.

2.2 Unpacking



When moving box, lift from the bottom.



It is recommended a minimum of two people assist when moving an object

exceeding 40-lbs.

Measurements:
(W x H x D)

Approx. 16.in x 8.5in x 15in

(419mm x 216mm x 381mm)

Weight:

Approx. 80-lbs (36-kg)

Caution:

Heavy equipment. Take care to avoid bodily injury.

Summary of Contents for NANO 1000S













































































Search results

Summary of Contents for NANO 1000S

Reviews:

Related manuals for NANO 1000S

Brands by name

Popular brands

Pace Technologies NANO 1000S, Manual

Search results

Summary of Contents for NANO 1000S

Reviews:

Related manuals for NANO 1000S

Brands by name

Popular brands