Pace Technologies NANO 1000S Manual Download Page 8

Page: 8 / 76

NANO 1000S Polisher

NSTRUCTION

ANUAL

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲

3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] W eb: https://www.metallographic.com

Please read this instruction manual carefully and follow all installation, operating and safety guidelines.

1.3 Basic Size Dimensions

1.4 Features

Note

: Installation of the NANO 1000S

should take place on a sturdy flat
surface with access to water, drain
and electrical connections.



The NANO 1000S is equipped with a

powerful 750W (1HP) servo motor for
better torque over the entire rpm range.



It also includes a full color LCD screen

and easily programmable speed and
time settings.



As well as a retractable faucet and

flexible hose system for easy water
access.

Retractable Faucet

Summary of Contents for NANO 1000S













































































Search results

Summary of Contents for NANO 1000S

Reviews:

Related manuals for NANO 1000S

Brands by name

Popular brands

Pace Technologies NANO 1000S, Manual

Search results

Summary of Contents for NANO 1000S

Reviews:

Related manuals for NANO 1000S

Brands by name

Popular brands