PACDOG nDXT+, Instructions For Use Manual

Page: 16 / 32

Turning EXC6 collar
ON (from OFF)
Turning EXC6 collar
OFF (from ON)
For RESET of EXC6, collar
must start from OFF
Move collar
towards
handset
HANDSET
(EXT/nDXT)
HANDSET
(example = nDXT)
Touch the two arrows
together
Separate collar
and handset
Move the collar &
handset together
until arrows touch
Move the collar &
handset together
until arrows touch
Move the collar &
handset together
until arrows touch
Hold for about 1 sec
until LED flashes green
and collar “beeps” once.
NB Wait for ‘beep’
before separating again.
Hold for about 1 sec until
LED flashes red and
collar “beeps” once.
NB Wait for ‘beep’ before
separating again.,
HOLD for about 5
secs, until LED fast
flashes red / green
Collar now ON
with LED flashing
@ 1/sec green
Collar now OFF
(with LED = OFF)
Separate collar &
handset. LED continues
fast flashing red / green .
Collar awaiting RESET
signal from handset.
Turn handset ON.
Press trigger#1 (or
address button#1) to
send matching signal
to collar;
RESET now complete
LED
EXC6 Collar
arrow
Location of
arrow on
side of nDXT
#1 trigger
on handset
HANDSET
= MAGNETIC
ACTUATOR
COLLAR
= MAGNETIC
SENSOR
SWITCH
Move
together
Touch
Separate
1 2 3
nDXT
EXC6
EXC6
Location of sensor
1
2 3 4 5
OFF
ON
RESET
EXC6 Collar ON/OFF RESET 16
A
B
C
D
E
Steady
OFF
i
3s
Recharge
handset
or
@ 1/sec
@1/sec
@10/sec
Handset battery status