59
Management Console Connections
Designation
Description
Designation
Description
1
Serial port (for Telnet access)
4
Local area network
2
DB9 to mini USB
5
PAC Management Software /
telnet console
3
CAT5e LAN cable
Connecting Unified Storage System to external consoles
Serial port (mini USB)
: Use the cable supplied with the system to connect to mini USB
port.
Ethernet port
: An Ethernet cable should be supplied by the user.
NOTE
ALWAYS connect to the primary controller.
A null modem may be required if you are using a 3
rd
party cable.
The serial port’s defaults are:
Baud Rate
38400
Data Bit
8
Parity
None
Stop Bit
1
Flow Control
Hardware
For TCP/IP connection and firewall configuration please refer to the PAC Management
Software online help or User’s Manual. If your network environment is not running DHCP
server protocols, a default IP, <10.10.1.1> can be used if you are accessing for the first time.
Power Connections
Once all hard drives have been properly installed and the I/O ports or management
interfaces have been connected, the system can be powered on.
Checklist
BEFORE
powering on the system, please check the following:
Hard drives:
Hard drives are correctly installed in the drive trays.
