26
Installing the Hard Drive into Drive Tray (PS 3025 excluded)
NOTE
Since the drive tray design of PS 3025 models are different, if you want to install a
hard drive for PS 3025 models, please refer to the next section.
To install the hard drive, follow the steps below.
Open the bezel by pressing the release button and gently pull out the tray
.
3.5 inch
2.5 inch
Place the hard drive into the drive tray, making sure that the interface connector is facing
the open side of the drive tray and its label side facing up.
If you want to install a SAS drive, an installed MUX board must be removed first.
Installing a 3.5” SAS / NL-SAS / SATA drive
Installing a 2.5” SAS / SATA drive
Installing the Hard Drive into Drive Tray for PS 3025 only
To install a hard drive for PS 3025 models, follow these steps below.
