18
TIMER
You can set the timer on/off.
Timing start up: after setting timing start up, the machine will automatically start
up and run when the timing time arrives.
In standby mode, press the timing key, and the corresponding timing indicator
time value flashes.The timing time can be adjusted by adjusting the temperature
up and down key (step distance is 1 hour), and the time interval range can be set
as 1~24 hours.Finally, press this button to start timing. At this time, the timing
indicates that the time value is always on, and the display displays the remaining
time.
1. The machine will automatically start up and run after the timing time is set.
2. If you want to cancel the timing function, you can press this button again.
3. If the set timing boot time is not reached, press the "on/off" button in
advance, the timing will be cancelled, and the machine will start up and run at the
same time.
Regular shutdown: after regular shutdown is set, the machine will automatically
stop running when the regular time is reached.
1. In the boot state, press the timing button, and the corresponding timing
indicator time value flashes.The timing time can be adjusted by adjusting the
temperature up and down key (step distance is 1 hour), and the time interval
range can be set as 1~24 hours.Finally, press this button to start timing, and the
timing LED will always be on;The digital tube displays the current set temperature.
2. The machine will shut down automatically when the timing time is set.
3. If you want to cancel the timing function, you can press this button again.
4. If the set timing shutdown time is not reached, press the "on/off" button in
advance, the timing will be cancelled, and the machine will be shut down and stop
running.
ON/OFF
Press "on/off" to start up, and then press "on/off" to shut down.
WIND
Press the swing wind button to start the swing wind function;Press the swing
button again, and the left and right swing function will be cancelled.
19
TEMP-
Under cooling and heating function, set in the range of 16 ~ 31 °C tempera-
ture.Every click on the temperature, set temperature reduced by 1 °C.
TEMP+
Under cooling and heating function, set in the range of 16 ~ 31 °C tempera-
ture.Each press keys on temperature, set temperature increase 1 °C.
MODE
Press the mode key to perform mode conversion and select one of the opera-
tion modes of "refrigeration, dehumidification, air supply, heating (optional), and
automation".
Cooling operation
1. Press the mode key until the refrigeration indicator is on, and select the
refrigeration function.While the refrigeration function is in progress, extend the
bar Put the tube out of the window so that hot air can escape from the room.
2. According to the temperature rise or lower key can adjust the set temperature,
the temperature range of 16-31 °C / 61 ~ 88 °F.
3. Press the wind speed button to select one of the high, medium and low wind
speeds.
Note:
In order to improve the cooling capacity of the machine, please note the
following: A) if the room is in direct sunlight, please close the curtains.
B) do not place the machine where there is a heat source.
Dehumidifying operation
1. Close the doors and Windows when using the machine to prevent excess
moisture from entering the room.
2. Press the mode key, the dehumidification indicator will light up, and the
display screen will display dH, and select the dehumidification function.In this
mode, the wind speed is not adjustable, the default low speed.
3. In the case of selecting dehumidification mode, expansion tube is not
required.
Fan operation
Press the mode key, the display will display FA, and select the function of air
supply.Press the wind speed button to select one of the high, medium and low
