![background image](http://html1.mh-extra.com/html/ozito/ujc-860/ujc-860_operation-manual_1666810008.webp)
OPERATION (cont.)
7
Clamping Material
1. Ensure the front vice jaw (1) is located towards
the front of the Uni-Jaws.
2. Place the workpiece onto the vice rails in
between the front vice jaw (1) and rear vice
jaw (2) (Fig. 14).
3. Position the rear vice jaw as close as possible
to the front vice jaw and ensure it is locked
into one of the 18 detents on the vice rails.
4. Rotate the clamping handle (5) in a
clockwise direction to move the front vice
jaw towards the rear vice jaw and clamp the
workpiece (Fig. 15).
5. Rotate the clamping handle until the vice jaws
are securely clamping the workpiece.
Fitting the Log Jaws
1. The Uni-Jaws comes fitted with Urethane jaw facings (3) which can be used for
both wood and metal workpieces (Fig. 16 & 17).
2. When clamping round logs the Uni-Jaws
must be fitted with the log jaws (18) (Fig. 18).
Fig. 14
Fig. 15
Fig. 18
Fig. 17
Fig. 16
UJC-860 manual.qxd 9/27/09 12:32 PM Page 8