![background image](http://html1.mh-extra.com/html/ozito/ujc-860/ujc-860_operation-manual_1666810009.webp)
OPERATION (cont.)
3. To replace the jaws first loosen the 2 hex
screws (4) on the front jaw by rotating in an
anti- clockwise direction using the 6mm
hex key (19) (Fig. 19).
4. The hex screws do not need to be completely
removed, simply loosen until the jaw facing can
be raised.
5. Slightly raise the jaw facing (3) and remove from
the front vice jaw (Fig. 20).
6. Repeat steps 3 to 5 for the rear vice jaw.
7. Attach the log jaw facing (18) onto the front vice
jaw ensuring the 2 hex screws are protruding
through the 2 slots in the log jaw (Fig. 21).
8. Tighten the 2 hex screws by rotating in a
clockwise direction using the 6mm hex key (19)
(Fig. 22).
9. Tighten both hex screws until the log jaw is
secure on the vice jaw.
10. Repeat steps 7 to 9 for the rear vice jaw.
11. The Uni-Jaws can now be used to clamp logs, this
is especially useful in chainsaw applications (Fig. 23).
8
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
UJC-860 manual.qxd 9/27/09 12:32 PM Page 9