4
SAFETY INSTRUCTIONS (cont.)
•
When transporting Uni-Jaws in a vehicle always tie it down to prevent movement
and possible damage.
•
Check to make sure that all fixing screws and knobs are tight and all legs are
locked into position before operating the Uni-Jaws.
•
The tool must be used only for its prescribed purpose. Any use other than those
mentioned in these instructions will be considered a case of misuse. The
manufacturer shall not be liable for any damage or injury resulting from such cases
of misuse.
•
The manufacturer shall not be liable for any changes made to the tool nor for any
damage resulting from such changes.
1. The Uni-Jaws comes fully assembled. To operate
the Uni-Jaws follow the simple set-up instructions.
2. Remove the Uni-Jaws from the carton and
carefully place it upside down on a flat surface
(Fig. 1).
3. Start by unfolding the front legs (11). Press the
front leg locking pin (9) (Fig. 2).
4. Unfold the front leg to the fully upright position (Fig. 3) and ensure that the
locking pin clicks into the opposite pin hole (A) (Fig. 4).
SETTING UP
Fig. 1
Fig. 2
Fig. 3
Fig. 4
A
UJC-860 manual.qxd 9/27/09 12:32 PM Page 5
