![background image](http://html1.mh-extra.com/html/ozito/idl-018/idl-018_instruction-manual_1666394014.webp)
13
IMPACT DRIVER OPERATION
!!
!!
WARNIING!
Remove the battery (4) from the tool before inserting or
removing a bit or when making any adjustments to your tool.
Installing a driver bit
Pull the driving bit retaining ring (1) forward and insert
the hex shank of the appropriate driver bit into the
driving bit retaining ring (1) (Fig. 4).
Release the driving bit retaining ring (1) and slowly pull
the driving bit forward until you feel the ring engage
with the groove in the bit indicating that the bit is
locked in position. (Fig. 5).
Check if the bit is correctly fitted by pulling on the bit
to see if it can be removed. (Fig. 6). If it cannot be
extracted out of the driving bit retaining ring (1) , the
bit has been inserted correctly.
WARNIING!
If the driving bit is not properly secured it may be ejected
unexpectedly during operation. This could potentially cause serious
personal injury or injury to others. Always ensure the driving bit is
secured properly before beginning operation.
Driving bit removal
Pull the driving bit retaining ring (1) forward and
remove the driving bit (Fig. 7). Release the driving bit
retaining ring (1).
Fig. 4
F
ig. 5
Fig. 6
Fig
. 7
Summary of Contents for IDL-018
Page 1: ......