![Ozito IDL-018 Instruction Manual Download Page 4](http://html1.mh-extra.com/html/ozito/idl-018/idl-018_instruction-manual_1666394004.webp)
INTRODUCTION
3
Congratulations on purchasing an Ozito Lithium Ion Impact
Driver. We aim to provide quality tools at an affordable price.
We hope you will enjoy using this tool for many years. Your
Lithium Ion Cordless Impact Driver IDL-018 is designed to
drive and remove screws and to tighten and loosen nuts
and bolts quickly and efficiently.
It is designed to be used in a DIY (Do It Yourself) context or
for hobbyist purposes. It is not built for continuous daily use
in a trade or professional capacity.
Screwdriver and socket bit changes are “tool-free”. No tool
is required to fit either of them.
ELECTRICAL SAFETY
!!
WARNING!
When using mains-powered tools, basic safety precautions,
including the following, should always be followed to reduce risk of fire,
electric shock, personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool
off, in an emergency, before operating the tool.
Save these instructions and other documents supplied with this machine for future
reference.
This tool is double insulated in accordance with AS/NZS 60335-1;
therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power
tool repairer in order to avoid a hazard.
Note:
Double insulation does not take the place of normal safety precautions
when operating this tool. The insulation system is for added protection against
injury resulting from a possible electrical insulation failure within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use
of an extension lead not suitable for the power input of the tool or which is
damaged or defective may result in a risk of fire and electric shock.
It is recommended that the extension lead is a maximum of 25m in length. Do Not
use multiple extension leads.
Summary of Contents for IDL-018
Page 1: ......