![background image](http://html1.mh-extra.com/html/ozito/idl-018/idl-018_instruction-manual_1666394013.webp)
12
ASSEMBLY
Always ensure the forward/reverse selector (3) is in the lock position before
removing or inserting the battery (6). By pushing the forward/reverse lever (3)
into the middles of both forward and reverse the variable speed switch (2) will
be in the lock position.
Installing the Battery
•
Holding the impact driver upright and picking up
the battery (6) in your opposite hand. Insert the
battery (6) until it clicks into place (Fig. 3).
•
Do not use excessive force when inserting the battery (6).
If the battery (6) does not slide in easily, it is not being
inserted correctly and could cause damage to the
battery (6), battery (6) terminals or the impact driver.
•
Do not operate the variable speed trigger switch (2) whilst
inserting the battery (6).
Removing the Battery
Depress the battery release button (7) and pull the battery (6) down away from the tool.
Getting the Best Performance from the Battery
The length of service from each charging cycle will depend on the type of
work undertaken.
To obtain the longest possible battery life, we suggest the following:
•
Store and charge your batteries in a cool area. Temperatures above or below
normal room temperature will shorten battery life.
•
Never store batteries in a discharged condition. Recharge them immediately after
they are discharged.
•
All batteries gradually lose their charge. The higher the temperature the quicker
they lose their charge. If you store your drill for long periods of time without using
it, recharge the batteries every month or two. This practice will prolong battery life.
Fig. 3
Summary of Contents for IDL-018
Page 1: ......