![background image](http://html1.mh-extra.com/html/ozito/idl-018/idl-018_instruction-manual_1666394011.webp)
CHARGING YOUR LITHIUM ION BATTERY
10
The batteries (6) have been shipped in a low charge condition, and requires charging
prior to use.
•
Connect the charger jack (9) to the charging cradle (10)
(Fig. 1).
•
Plug the charger adaptor (8) into a mains power outlet.
•
The green light on the charging cradle (10) will
illuminate showing that power is being supplied to the
charging cradle (10).
•
With the charging cradle (10) sitting flat on a
bench/table, insert the battery (6) into the recess of the
battery terminals ensuring a firm connection (Fig. 2).
•
The battery (6) fits in one direction only. If you need to
force the connection it means the battery (6) is facing
the wrong way.
•
When the battery (6) is properly seated, the red light on
the charging cradle (10) will illuminate if the battery (6) is
partially or fully discharged, signifying that the battery (6) is charging.
•
When the battery (6) is fully charged, the red light will extinguish signifying that the
battery (6) is fully charged.
•
A battery takes 3 - 5 hours to charge. Charging starts automatically when the
battery is connected to the charger. Remove the battery (6) from the charging
cradle (10) after 5 hours.
Initial Charge
•
The battery (6) will not reach its full charge the first time it is charged.
•
The green LED will remain illuminated until the charger is disconnected from the
mains power outlet.
•
Allow several charging cycles of charging and then discharging (through use of the
tool) for the battery (6) to reach its maximum charge.
Caution:
Disconnect the charger adaptor from the mains power when charger is not
in use.
Note:
If the light on the charging cradle (10) fails to come on:
- Check the charger adaptor (8) is securely plugged into the mains power
outlet and switched on.
- Check the battery (6) is firmly seated onto the charging cradle (10).
- Check the charger jack (9) is securely connected into the charging cradle (10) socket.
Fig. 1
Fig. 2
Charger
jack
Summary of Contents for IDL-018
Page 1: ......