4. USAGE
HPW-1885K
Overload Protection
The tool is equipped with an overload protection feature. If an
overload occurs, the tool will automatically shut off to protect the
tool.
1. In the event of an overload
turn the on/off dial to the
‘OFF 0’ position, allow
the tool to cool down and
remove the power plug from
the mains socket.
2. Shut off the water supply completely and squeeze the spray gun
trigger several times to release any built up pressure and water
in the system, then disconnect the garden hose from the water
inlet port.
3. Unscrew the hose adaptor
from the water inlet port and
inspect the mesh filter for
any blockages.
4. Clean the filter as necessary
and reinstall it when done.
5. Once the unit has cooled sufficiently, restart the unit and use as
normal.
WARNING!
DO NOT CONTINUE USING THE UNIT IF
THE OVERLOAD SWITCH TRIPS AGAIN IMMEDIATELY
AFTER THE RESET.
WARNING!
WHEN INSPECTING EQUIPMENT FOR
FAULTS, ENSURE THE UNIT IS SWITCHED OFF AND THE
POWER CABLE IS DISCONNECTED BEFORE CARRYING
OUT INSPECTION.
Shutting Down The Pressure Washer
WARNING!
PRESSURISED WATER. SHUT OFF WATER
SUPPLY, TURN OFF UNIT AND SQUEEZE THE SPRAY
GUN TRIGGER TO RELIEVE THE PRESSURE BEFORE
DISCONNECTING THE HIGH PRESSURE HOSE.
1. Twist the on/off dial to the off position and disconnect the power
plug.
2. Shut off the water supply completely and squeeze the spray gun
trigger several times to release any built up pressure and water
in the system.
Quick Start Procedure
1. With the adjustable spray
nozzle attached, adjust it to
the widest spray setting.
2. Attach the garden hose to
the water inlet port and turn
on the water at the tap.
3. Squeeze the spray gun
trigger to prime the pump
and purge any air from the
system.
4. Plug the power cord into mains power.
5. Turn the unit on using the on/
off dial to start washing.
WARNING!
ENSURE THE PRESSURE WASHER IS
PLACED ON A FLAT, HARD SURFACE. ALWAYS HAVE
THE PRESSURE WASHER IN AN UPRIGHT POSITION
DURING USE.
WARNING!
ENSURE THAT THE SPRAY JET IS NOT
DIRECTED AT POWER LINES, ELECTRICAL OUTLETS OR
ELECTRONICS.
WARNING!
HIGH PRESSURE HOSES, FITTINGS &
COUPLINGS ARE IMPORTANT FOR THE SAFETY OF
THE USER. USE ONLY HOSES, FITTING & COUPLINGS
SUPPLIED.
WARNING!
ALWAYS WEAR SAFETY BOOTS, SAFETY
GLOVES, SAFETY HELMET WITH VISOR AND HEARING
PROTECTION WHILE OPERATING THE EQUIPMENT.
WARNING!
DO NOT POINT THE SPRAY JET AT ANY
PART OF YOUR BODY, OTHER PEOPLE, PETS OR
ANIMALS. THE PRESSURISED WATER STREAM CAN
CAUSE SERIOUS CUTS AND INJURIES.
OFF/ 0
ON/ I
1885PSI
1600W
HIGH PRESSURE WASHER
Flat Fan
a.
b.
RELEASE
PRESS & HOLD
30s to 1min
OFF/ 0
ON/ I
1885PSI
1600W
HIGH PRESSURE WASHER
