Using The Foam Bottle
Pour detergent directly into
the foam bottle and attach it to
the lance. Follow the detergent
manufacturers’ directions for
use.
Adjusting The Spray Jet
The water jet output can be controlled when using the adjustable
turbo lance.
1. Turn the nozzle clockwise for
a wide, fan jet to clean larger
areas faster.
2. Turn the nozzle anti-
clockwise for a narrow
jet over a small area for
concentrated cleaning.
3. CONTROLS
OPERATION
RELEASE
WARNING!
NEVER RUN BLEACH OR DETERGENTS NOT
DESIGNED FOR PRESSURE WASHERS IN THE UNIT TO
PREVENT DAMAGING THE PUMP.
The high pressure washer is designed to force water at high
pressure via a pump through a concentrating nozzle.
It is intended for washing dirt, mud and dust from cars, garden
equipment, outdoor furniture, clean grime from barbecue hot
plates and grills, wash down driveways, patios, decks and brick
walls.
Starting & Stopping The Unit
1. Rotate the on/off dial to the
‘ON I’ position to turn the
unit on.
2. Unlock the spray gun by
pressing the back end of the
trigger lock.
2. Squeeze the spray gun
trigger to start spraying.
3. Release the trigger to stop spraying.
WARNING!
LOCK THE SPRAY GUN TRIGGER WHEN NOT
IN USE TO PREVENT ACCIDENTAL STARTING.
4. Rotate the dial to the ‘OFF
0’ position to switch the unit
off.
WARNING!
DO NOT LEAVE THE UNIT IDLING IN THE
‘ON’ POSITION FOR MORE THAN 5 MINUTES WITHOUT
ACTIVATING THE SPRAY GUN. DOING SO MAY DAMAGE
THE PUMP IN THE UNIT.
WARNING!
THE POWER SUPPLY FOR THIS PRODUCT
MUST BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
OFF/ 0
ON/ I
1885PSI
1600W
HIGH PRESSURE WASHER
OFF/ 0
ON/ I
1885PSI
1600W
HIGH PRESSURE WASHER
a.
b.
RELEASE
a.
b.
RELEASE
Flat Fan
Solid Cone
