page.
27
/
42
27
PNEUMATIC ELEMENTS
3.
When air is given from B, the cylinder rod must still be giving out air, the neck seal C must be
malfunctioning. If after checking them, A, B and C give out no air but there still is a leakage
through the valves exhaust, check the valve.
4.
After you have checked them, if A, B and C give out no air but there still is a leakage through
the valves exhaust, then check the valve.
5.
If the coil does not move by pressing the manual button, the coil may have broken down and
it must be replaced. (A very low voice coming from coils when electric applied to them must
be heard.) If the voice cannot be heard, check the electricity feed for coils.
7.2
CYLINDER SPEED ADJUSTMENT
Picture 7.2-1 Cylinder speed adjustment
►
The part adjustment nut numbered (1) is loosened. The adjustment bolt numbered (2)
is fastened or loosened.
►
Therefore the piston motor movement enabling speed is detected by adjusting the pressure
affecting the piston (6) inside the cylinder (5). Also by loosening and opening the screw
numbered (3) we cal make the adjustment of padding.
NOTE:
This process is applied in the same way for every cylinder with air reducer.
NOTE:
It is used to prevent the shaking or the bumping in the last point of the direction in the
opening or closing of the piston spindle.
