page.
22
/
42
22
PRINCIPLES OF WORK
5.8
PIECES CUTTING
PIECES CUTTING
START
STOP
TAKE
POSITION
Profile SIZE
1400 mm
Cutting Q-TY.
0
90
°
90
°
LEFT SAW
RIGHT SAW
03 sec.
03 sec.
Cut. SIZE
30 mm
DEL
Picture 5.8-1 Pieces cutting mode
1.
Size of the profile before cutting.
2.
Quantity of cutting.
3.
Delete quantity of cutting.
4.
Required piece size.
5.
Time interval for saw output - Head №1.
6.
Time interval for saw output - Head №2.
7.
Angle position for Head №1.
8.
Angle position for Head №2.
9.
“Start”. Cutting start command.
10.
“Stop”. Cutting stop command.
11.
“Take Position”. Program Start command.
12.
Arrow “Back”. To enter main menu.
WORKING PRINCIPLE
►
The principle of given operation mode consists in automatic cutting of profile on equal parts.
Basically it is used for aluminium profile corner buffer joinery.
1.
Enter size of profile before cutting (1).
2.
Enter reqired pieces size (4).
3.
Enter time intervals for saw output (5) & (6).
Time intervals could be changed depends on saw output speed, width of cutting material
(profile).
4.
Enter angle position for both heads (8) & (7). Heads automatically set on 45° or 90°.
5.
Push “Take Position”. Head №2 automatically will set on given size (1).
6.
Put the profile for cutting on plate of machine.
7.
Switch ON motors for Head №2 (5) and Head №1 (9).
8.
Push on “Start” (9). Automatic program starts:
Pneumatic cylinders clamlps the profile.
Head № 1 &2 cut the edges of profile from both sides.
1
2 4
3
5
6
7
8
9
10
11
12
