page.
26
/
42
26
PNEUMATIC ELEMENTS
Picture 6.3-1 Blade changing
7.
PNEUMATIC ELEMENTS
7.1
VALVE AND CYLINDER CONTROL
Picture 7.1-1 Valve and cylinder control
1.
Piston cuff
2.
Ring gasket
►
If some operations on machine does not start to process or an air leakage occurs continuously in
the valves, you should perform following:
1.
Look the pneumatic drawing to understand which cylinder works with which valve. If you
don’t have the pneumatic drawing, follow the input- output pipes of the cylinder to
understand.
2.
Take off the air pipes connected to the A and B cable glands. Give air from A and check from
B. If air comes from B, the cylinder seal must be malfunctioning.
1
2
