5. OCCUPATIONAL SAFETY and MEASURES
18 |
P a g e
5.8 Connections
All necessary connections must be prepared at the layout site in line with the machine. Electrical
power, pneumatics or similar demands must be at values meeting requirements, and
compatible equipment must be kept available at the layout site. Take IEC 64-8 norm into
consideration for the installation of electrical equipment.
Note: If the system is equipped with a power supply, then it must have a 0.3A circuit-breaker
and start-up procedures must be performed by experts.
5.9 Earthing Requirements
Earthing system must conform to standard features described in IEC 64-8. It must be
compatible with IEC64 and IEC364 norms for low-voltage equipment. Earthing procedures must
be performed in consideration of the voltage value. A stands for the marked point earthing inlet.
Summary of Contents for OMRM 121
