6. Safety Equipment
6.1 Risky Areas and Warnings
Safety measures are taken on the machine through equipment, but it is also required to comply
with additional visual safety measures at the operating site.
•
Contact with moving parts may lead to electric shock.
•
Do not use sharp objects on protective
•
Do not use pointed objects that can penetrate into the protective isolation equipment.
•
Turn off the power supply prior to any maintenance or adjustment.
•
During the operation of machine, pay attention to moving
part.
•
Keep both hands away from equipment during operation.
•
Do not make any adjustments or do not perform maintenance during operation.
•
Do not grab moving parts with hands.
•
Do not put your hand in the area with hot
•
Do not hold hot equipment.
•
Use protective gloves to replace hot equipment.
•
Do not extend your hand to any heated plate etc.
•
Do not put your hand anywhere with a risk of jamming.
•
Do not keep your hands on machine except for buttons.
•
Take safety actions during maintenance and cleaning procedure.
•
Take measures to avoid cuts while replacing milling cutters and drilling bits.
•
This machine does not create a volume of sound detrimental to health.
•
Please read the relevant user's guide
•
Keep user’s guide at a visible spot.
6.1 Risky Areas and Warnings
Safety measures are taken on the machine through equipment, but it is also required to comply
with additional visual safety measures at the operating site.
Contact with moving parts may lead to electric shock.
Do not use sharp objects on protective isolation equipment as they may do harm.
Do not use pointed objects that can penetrate into the protective isolation equipment.
Turn off the power supply prior to any maintenance or adjustment.
During the operation of machine, pay attention to moving equipment or to those used to fix a
Keep both hands away from equipment during operation.
Do not make any adjustments or do not perform maintenance during operation.
Do not grab moving parts with hands.
Do not put your hand in the area with hot equipment.
Do not hold hot equipment.
Use protective gloves to replace hot equipment.
Do not extend your hand to any heated plate etc.
Do not put your hand anywhere with a risk of jamming.
Do not keep your hands on machine except for buttons.
safety actions during maintenance and cleaning procedure.
Take measures to avoid cuts while replacing milling cutters and drilling bits.
This machine does not create a volume of sound detrimental to health.
Please read the relevant user's guide carefully. Try to understand the safety warnings.
Keep user’s guide at a visible spot.
21 |
P a g e
Safety measures are taken on the machine through equipment, but it is also required to comply
isolation equipment as they may do harm.
Do not use pointed objects that can penetrate into the protective isolation equipment.
equipment or to those used to fix a
Do not make any adjustments or do not perform maintenance during operation.
Take measures to avoid cuts while replacing milling cutters and drilling bits.
This machine does not create a volume of sound detrimental to health.
carefully. Try to understand the safety warnings.
Summary of Contents for OMRM 121
