10. General Maintenance Issues
44 |
P a g e
Note:
In normal standby position of the machine, backward and forward sensors of LED lights in
relation to the cylinder position should be lit. You can adjust sensor settings using the special
allen key located in the spare part box.
10.9 Filter Maintenance
For pressure settings: Pull up the
regulator cap "1". If you rotate it clockwise, then
outlet air pressure of conditioner increases. If
you rotate it counter clockwise, then pressure
decreases.
Discharging condensation fluid. Press or rotate
the discharge screw "2" to discharge the water.
Putting oil into conditioner: Take off the oil
container of conditioner "3" by rotating it
clockwise and put pneumatic oil into container.
Speed settings for lubricant: Turn adjusting screw
“4” clockwise and thus you can reduce flow
(dripping) rate of lubricant and decrease it by
turning in the opposite direction.
4
Summary of Contents for OMRM 121
