OZGENC MAKINA OMRM 113, Operation Manual

Page: 62 / 110

OMRM 113 User Manual
67 | P a g e
1 Used to turn off the program and the computer
2 Allows switching to manual cutting mode
3 Allows switching to automatic cutting mode ( ERCOM Program is opened)
4 Allows switching to long profile cutting mode
5 Allows switching to wedge cutting mode
6 Returns to previous menu (language options)
10.13.1 Manual Cutting Mode

Manual Operation Mode screen that opens after pressing "Home" button is as follows.
Important Note! : You will see the following screen when you open the machine first whatever the
operation mode is (Machine is not in home position). You need to send the machine to first limit (home)
position by clicking "HOME" tab below. This will start machine self-calibration automatically. When Home
button is clicked, movable unit will slowly move towards fixed unit and stop and calibration will be
completed.