OMRM 113 User Manual
21 |
P a g e
6. OCCUPATIONAL SAFETY and MEASURES
6.1 Safety Switch
This section contains information required for safe use of the machine and general equipment.
6.2 Safety and Accident Measures
Required warnings regarding accidents and measures to be taken are given in the User's Guide.
Still, user is responsible for warning and guiding workplace employees for complying with
occupational safety rules. Workplace officers are responsible for performing required practical
follow-ups. Operator must have full command over safety rules of the machine before starting
to operate it. Current safety components at the time of machine delivery must be kept intact.
Manufacturing company cannot be held legally accountable for any accident and safety gap
resulting from operation not compliant with use and safety requirements of the machine. Such
risks shall also affect warranty conditions. Manufacturing company shall not be responsible for
any accident and fault that may result from use of machine and equipment outside its
instructions. Any critical part requiring replacement due to wearing etc. of the machine and other
equipment must be immediately replaced.
Operator is responsible for use, cleaning, adjustment, operation, maintenance etc.
6.3 Machine Usage and Misuse
OMRM 113 is designed for cutting PVC and Aluminum profiles Any machine fault and
occupational safety gap other than those resulting from procedures are under user’s
responsibility.
Summary of Contents for OMRM 113
