OZGENC MAKINA OMRM 113, Operation Manual

Page: 24 / 110

OMRM 113 User Manual
26 | P a g e
7.1 Risky Areas and Warnings
Safety measures are taken on the machine through equipment, but it is also required to comply
with additional visual safety measures at the operating site.

Any contact with moving parts may lead to electric shock.

Do not use sharp objects on protective isolation equipment as they may do harm.

Do not use pointed objects that can penetrate into the protective isolation equipment.

Turn off the power supply prior to any maintenance or adjustment.

During the operation of machine, pay attention to moving equipment or to those used to fix a
part.

Keep both hands away from equipment during operation.

Do not make any adjustment or do not perform maintenance during operation.

Do not grab moving parts with hands.

Do not put your hand in the area with hot equipment.

Do not grab hot equipment.

Use protective gloves to replace hot equipment.

Do not extend your hand to any heated plate etc.

Do not put your hand anywhere with a risk of jamming.

Do not keep your hands on machine except for buttons.

Take safety actions during maintenance and cleaning procedure.

Take measures to avoid cuts while replacing milling cutters and drilling bits.

This machine does not create a level of sound detrimental to health.

Please carefully read the relevant user's guide. Try to understand the safety warnings.

Keep the user’s guide at a visible spot.